View CSM1200_6983977.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 1 o f 12 qc 88000-c001: 2007 iecq-cecc qc 88000-c001 component issue 6 specification march 2007 component specification for ceramic hermetically sealed transistor optocouplers up-to-date lists and bibliographical references of ieqc-cecc publications may be downloaded from www.iecq.org further copies of this document may be obtained fro m: iec international electrotechnical commission commission electrotechnique internationale box 131, rue de varemb, ch 1211 geneva 20, switzer land
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 2 o f 12 qc 88000-c001: 2007 foreword the iecq quality assessment system for electronic c omponents (iecq) is composed of those member countr ies of the international electrotechnical commission (iec) who wish to take part in a harmonized system for e lectronic components of assessed quality. iecq is also known in some european member countries as iecq-cecc. the object of the system is to facilitate internati onal trade by the harmonization of the specificatio ns and quality assessment procedures for electronic components, an d by the grant of an internationally recognised mar k, or certificate of conformity. the components produced or services provided under the system are thereby acceptable in all member countries without further testing. this component specification is based upon the requ irements of iec publication qc 001002-2, and has be en prepared by: isocom ltd hutton close crowther industrial estate washington tyne and wear ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 and published under the authority of: bsi product services maylands avenue hemel hempstead hertfordshire hp2 4sq united kingdom amendment record issue 1 - changed page 10 ? amendments 25/06/10 issue 2 - changed page 4 ? amendments 22/03/10 issue 3 - changed pages 4 & 6 ? updated drawings 25 /06/10 issue 4 - changed pages 3 & 4 ? added devices is49 & 4n49 05/07/10 issue 5 - changed pages 3, 4, 5, 6, 7 & 10 ? rohs c ompliant, added csm165-2 & amendments 13/07/10 requirements the requirements for iecq-cecc component specificat ions as detailed in qc 001002-2 amendment 1 clause 5.4 are satisfied by the following data sheet. it should note that iecq-cecc are not responsible f or manufacturers declarations made in data sheets w hich fall outside the limits of approved detailed in iecq-cec c certificates. this component specification is intended for use wi th applicable iecq-cecc assessment specifications. eg: qc 88000-a0001
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 3 o f 12 qc 88000-c001: 2007 ceramic hermetically sealed transistor optocouplers 4n24 CSM1200 4n49 csm1224 cd500/501 csm165-2 ch300 csm165-4 cs200/201 csm2224 cs224 is49 csm200 features applications ? release to iecq-cecc ? military, high reliability system ? hermetically sealed ? medical instruments ? high density packaging ? mos, cmos applications ? 1500v dc withstand test voltage ? logic interfacing ? low input requirements ? data transmission ? high current transfer ratio ? power supply ? rohs compliant ? modems description these devices are single, dual and quad, hermetical ly sealed optocouplers. each channel is composed of an infra-red emitting diode and a silic on phototransistor. package styles for these devices include 6 pin, 8 pin, 16 pin flat pack, and hybrid 4 pin, with surface mount, butt cut and gul l wing options available. the same electrical die, assembly processes and mat erials are used for each channel of each device shown below. therefore absolute maximum rati ngs, recommended operating conditions, electrical specifications and performance character istics are identical for all units. any exceptions, due to packaging variations and limitations, are as noted.
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 4 o f 12 qc 88000-c001: 2007 selection guide package styles and configuration op tions package 4 pin hybrid 6 pin metal can to-5 6 pin lcc 6 pin dip 8 pin dip 16 pin flat pack lead style channels 1 1 1 1 2 2/4 common channel wiring isocom part numbers and options commercial ch300 4n24 4n49 csm200, is49 CSM1200/1244/2224 cs200/201 cs224 cd500 cd501 csm165 defense screen level ch300/l2 4n24/l2 4n49/l2 csm200/l2, is49/l2 CSM1200/1244/2224/l2 cm200/201/l2 cs224/l2 cd500/l2 cd501/l2 csm165/l2 space screen level ch300/l2s 4n24/l2s 4n49/l2s csm200/l2s, is49/l2s CSM1200/1244/2224/l2s cs200/201/l2s cs224/l2s cd500/l2s cd501/l2s csm165/l2s standard gold plate finish gold plate gold plate gold plate gold plate gold plate solder dipped option 20 option 20 butt cut/gold plate option 10 option 10 gull wing/soldered option 30 option 30 crew cut/gold plate option 60 option 60 functional diagrams ch300 cs200/201 csm200 csm1224 is49 cd500 cd501 csm165-2 4 pin hybrid 6 pin dip 6 pin lcc 6 pin lcc 8 pin dip 16 pin flat pack 1 channel 1 channel 1 channel 1 channel 2 channel *2 channel 12 65 4 6 1 54 3 4n24 4n49 cs224 CSM1200 csm2224 csm165-4 6 pin to-5 6 pin dip ** 6 pin lcc 6 pin lcc 16 pin flat pack 1 channel 1 channel 1 channel 1 channel 4 channel 5 7 32 1 6 1 54 3 6 1 54 3 * note 2 channel is only for circuit of 2 middle ch annels 2 & 3 channel on the circuits. ** see outline drawings 6 terminal lcc surface moun t, 1 channel
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 5 o f 12 qc 88000-c001: 2007 outline drawings 16 pin flat pack, 2 and 4 channel 7.24 (0.285) 6.99 (0.275) 11.13 (0.438) 10.72 (0.422) 2.29 (0.09) max 1.27 (0.05) ref 0.46 (0.018) 0.36 (0.014) 8.13 (0.32) max 2.85 (0.112) max 5.23 (0.206) max 9.02 (0.355) 8.76 (0.345) 0.31 (0.012) 0.23 (0.009) 0.89 (0.035) 0.69 (0.027) 0.88 (0.0345) min note: dimensions in millimeters 8 pin dip 2 channel 0.51 (0.020) min 9.40 (0.370) 9.91 (0.39) 0.76 (0.03) 1.27 (0.05) 4.32 (0.17) max 3.81 (0.15) min 0.51 (0.02) max 2.29 (0.09) 2.79 (0.11) 7.36 (0.29) 7.87 (0.31) 0.2 (0.008) 0.33 (0.013) 7.16 (0.282) 7.57 (0.298) 8.13 (0.32) max note: dimensions in millimeters
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 6 o f 12 qc 88000-c001: 2007 6 pin to-5, 1 channel 0.040(1.02) 0.32 (8.13) 0.5 (12.70) 0.17 (4.32) 0.022 (5.08) 4 5 . 0 0.037 (0.935) 0.031 (0.787) 1 2 3 5 6 7 6 leads 0.0175 (0.445) 6 pin dip 1 channel 8.94 9.34 7.16 7.56 7.62 8.12 0.63 1.14 0.4 0.5 2.54 3.5 min 1.37 typ 2.8 min 0.22 0.3 note: dimensions in millimeters 6 terminal lcc surface mount, 1 channel 6.223 4.318 1.651 2.286 0.635 1.27 2.54 r = 0.2286 0.635 1.67 0.762 **
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 7 o f 12 qc 88000-c001: 2007 device marking xxxxxxx isocom xxxx isocom part number manufacturer date code (xx year xx week)
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 8 o f 12 qc 88000-c001: 2007 hermetic optocoupler options option description 10 surface mountable hermetic optocoupler with leads t rimmed for butt joint assembly. this option is available on commercial hi-rel product in 8 and 16 pin dip 0.51 (0.02) min 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) max 1.14 (0.045) 1.40 (0.055) 4.32 (0.17) max 0.51 (0.2) min 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) max 1.14 (0.045) 1.40 (0.055) 4.32 (0.17) max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 20 30 surface mountable hermetic optocoupler with leads c ut and bent for gull wing assembly. this option is available on commercial and hi-rel product in 8 and 16 pin dip. 0.51 (0.02) min 2.29 (0.9) 2.79 (0.11) 0.51 (0.02) max 1.4 (0.055) 1.65 (0.065) 4.57 (0.18) max 0.51 (0.02) min 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) max 1.4 (0.055) 1.65 (0.065) 4.57 (0.18) max 9.65 (0.38) 9.91 (0.39) 0.2 (0.008) 0.33 (0.013) 4.57 (0.18) max 5 deg max 60 surface mountable hermetic optocoupler with leads t rimmed for butt joint assembly. this option is available on commercial hi-rel product in 8 and 16 pin dip 0.51 (0.02) min 2.29 (0.09) 2.79 (0.11) 1.14 (0.045) 1.25 (0.049) 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 3.81 (0.15) min 0.51 (0.02) min 2.29 (0.09) 2.79 (0.11) 1.02 (0.04) typ 3.81 (0.15) max
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 9 o f 12 qc 88000-c001: 2007 absolute maximum ratings storage temperature -65c to +150c operating temperature -55c to +125c lead soldering temperature 260c 1.6mm from case fo r 10s 1500vdc input-to-output isolation voltage 500vdc for ch300 input diode 50ma forward dc current 15ma for ch300 7v 5v for ch300 3v for csm165 reverse dc voltage 2v for cs224 peak forward current 1.5ma 10s duration 100mw derate linearly above 100c at 1.6w/c. 150mw for cd500/501 andcsm165. derate linearly abov e 100c at 1.4w/c for cd500/501, and at 1.6 w/c for csm165 power dissipation 25mw for ch300 output transistor collector-emitter voltage 50v bv ceo 30v for ch300 35v for cs224 emitter-collector voltage 7v bv eco 70v bv cbo for cs200/201 and cs224 collector-base voltage 35v for cs224 50ma collector current 20ma for ch300 collector current 100ma t = 1ms 100mw for ch300. derate linearly above 100c at 1.4 w/c power dissipation 150mw for cs200/201, cs224, cd500/501 and csm165. derate linearly above 100c at 1.4w/c
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 10 of 12 qc 88000-c001: 2007 electrical characteristics t a = 25c u.o.s. (each channel where appropriate). input diode electrical characteristics parameter symbol test conditions device min type ma x units i f = 10ma 0.7 1.18 1.8 i f = 10ma, t a = 125c 0.7 1.10 1.8 forward voltage v f i f = 10ma, t a = -55c 0.7 1.29 1.8 v (note 4) reverse breakdown voltage v r i r = 0.1ma 5 - - v reverse current i r v r = 3v - - 100 a capacitance c in v = 0, f = 1mhz - 25 - pf output detector electrical characteristics collector-emitter breakdown voltage (see note 1 below) bv ceo i c = 1ma ch300 40 30 - - v collector-base breakdown voltage (see note 1 below) bv cbo i b = 0.1ma 70 - - v emitter-collector breakdown voltage bv eco i e = 0.1ma 7 - - v emitter-base breakdown voltage bv ebo i b = 0.1ma 5 - - v v ce = 20v, i f = 0 v ce = 15v i f = 0 csm165 - 6 100 a collector-emitter leakage current i ceo v ce = 20v, i f = 0, t a = 125c - 8 100 a coupled electrical characteristics i f = 10ma, v ce = 5v cs201 50 100 - - i f = 10ma, v ce = 5v, t a = 125c cs201 50 - - i f = 10ma, v ce = 5v, t a = -55c cs201 50 - - dc current transfer ratio (see note 3) ic/if i f = 10ma, v ce = 5v; t a = -55c-125c 35 - - % optical crosstalk i ceox v ce = 15v, , i f 2-4 = 10ma. csm165 250 a i f = 10ma, i c = 2.5ma - - 0.3 i f = 10ma, i c = 10ma csm165 0.4 0.9 v collector-emitter saturation voltage v ce (sat) i f = 2ma, i c = 0.2ma ch300 0.25 input to output capacitance c io v io = 0, f = 1mhz (see note 2 below) - 3 5 pf input to output resistance r io v io = 500v (see note 2 below) - 10 11 - isolation voltage v io (see note 2 below) ch300 1500 500 - - vdc delay time td v cc = 5v, i c = 2ma - 4.0 s rise time tr r l = 100ohms - 5.0 s storage time ts - 0.7 s fall time tf - 5.0 s turn -on time t on v cc = 5v, i f = 5ma - 9 s turn-off time t off r l = 1kohms - 25 s notes: 1. bv ceo and bv cbo can be selected to suit customer specifications. 2. measured between input when leads 1, 2 and 3 a re shorted together and output when leads 4, 5 and 6 are shorted together. 3. a higher ctr can be selected to suit customer specification as a standard part. 4. for radiation tolerant v f max = 2.0v
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 11 of 12 qc 88000-c001: 2007 electrical characteristics
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 12 of 12 qc 88000-c001: 2007

▲Up To Search▲

Price & Availability of CSM1200

	To Download CSM1200 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .